Accelerator Technologist III – Cryogenics Plant Operator (Controls & Instrumentation)
Description
The Cryogenic Division at SLAC National Accelerator Laboratory is seeking an Accelerator Technologist III – Cryogenics Plant Operator to support the operation of the Cryogenic Plant (2.0K Helium Refrigeration System) that is part of the LCLS Superconducting Linear Accelerator. You will work under general supervision or under advisement from higher level Accelerator Technologists and perform assignments of intermediate to advanced complexity in instrumentation & controls work and one or more technical areas of mechanical, refrigeration/vacuum, electrical/electronics, etc. all of which are part of the cryogenics plant operator skillsets.
The Technologist III is highly proficient and will independently plan and conduct a block of work as a complete project under managerial oversight, or as a portion of a larger and more diverse project, with strict adherence to site-specific safety as well as work planning and control (WPC). The Accelerator Technologist III will be in charge ensuring efficient use of resources and monitoring target dates.
Specific job duties include but are not limited to:
- Calibrate, test, and validate sensors (such as temperature, pressure, level, and flow transmitters) under cryogenic conditions.
- Perform preventive and corrective maintenance on cryogenic hardware, vacuum systems, transfer lines, and control loops.
- Diagnose and resolve electrical, signal, or mechanical issues in complex process and data acquisition systems.
- Specify, procure, and install new instrumentation and wiring into facility-wide control, safety interlock, and monitoring networks (e.g., PLCs, or SCADA).
- Ensure strict adherence to safety protocols for handling liquefied gases (like liquid nitrogen, helium, etc.) and working in hazardous or restricted environments.
- Perform tests and precision specification measurements on system components and multiple utility support systems.
- Utilize a wide variety of tools and equipment, such as specialized hand tools, portable electronic test equipment, and calibration/maintenance tools.
- Diligently maintain equipment operating records and daily log sheets to ensure compliance and traceability.
- Collaborate with experimenters, engineers, physicists, and other groups on the design, installation, modification, and performance of cryogenic systems.
- Become proficient and improve multiple operator skills sets; seek thorough understanding of Instrumentation & Controls, mechanical tech and electrical/electronics principles and hardware.
- Work on and around pressure systems, confined spaces, and elevation sometimes requiring fall protection.
- Work schedule may include overtime hours, off-shift, weekends & holiday schedules.
Note: Technologist III is expected to have proficiency to perform intermediate to advanced complexity assignments across multiple disciplines /skills.
Qualifications:
- H.S./GED or vocational school apprenticeship, plus three years of laboratory or industrial mechanical/electrical experience can be substituted. College, Technical degree, or military training, preferred.
- Demonstrated electrical-mechanical aptitude and ability to perform intermediate to advanced complexity controls/instrumentation job duties.
- Ability to read and interpret instrumentation, piping, electrical and electronic drawings, and sketches.
- Technical knowledge of industrial equipment operation & repair. Requires a practical working knowledge of a broad range of fields and equipment such as thermal transfer & isolation, electrical laws, instrumentation & controls, pneumatics, hydraulics, and high-pressure gas systems.
- The ability to use a wide variety of hand & power tools.
- The candidate should be familiar with site environmental and safety rules, regulations, and requirements, and be trained to handle, store, and dispose of hazardous materials appropriately.
- Demonstrated use of solid math skills & computer proficiency.
- Demonstrated understanding and ability to control the helium cryogenic process.
- Demonstrated ability to install, maintain, calibrate, and diagnose pneumatic and electronic instruments and control loops: ability to read and understand PLC Ladder Logic
- Demonstrated knowledge and experience in multiple cryogenics technical operator skillsets such as Instrumentation & Controls, Gas Process, and electrical/electronic principles and hardware.
- Requires sufficient skills, knowledge, and ability to work independently with little to no supervision and occasionally alone on shift.
- Able to effectively communicate technical issues with senior engineers, operators, tech support personnel, vendors, and others in a diverse multicultural environment.
- Knowledge of pressure systems including pressure vessels, piping and safe operation thereof.
- Ability to operate forklifts, overhead cranes, scissor lifts, boom lifts, and other industrial equipment.
- Must possess a valid driver’s license to drive vehicles on site.
SLAC Competencies:
Effective Decisions: Uses job knowledge and solid judgment to make quality decisions in a timely manner.
Self-Development: Pursues a variety of venues and opportunities to continue learning and developing.
Dependability: Can be counted on to deliver results with a sense of personal responsibility for expected outcomes.
Initiative: Pursues work and interactions proactively with optimism, positive energy, and motivation to move things forward.
Adaptability: Flexes as needed when change occurs, maintains an open outlook while adjusting and accommodating changes.
Communication: Ensures effective information flow to various audiences and creates and delivers clear, appropriately written, spoken, presented messages.
Relationships: Builds relationships to foster trust, collaboration, and a positive climate to achieve common goals.
WORK STANDARDS:
- Interpersonal Skills: Demonstrates the ability to work well with Stanford colleagues and clients and with external organizations.
- Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for environment, safety and security; communicates related concerns; uses and promotes safe behaviors based on training and lessons learned. Meets the applicable roles and responsibilities as described in the ESH Manual, Chapter 1¿General Policy and Responsibilities:
Core Duties:
- Independently plan and conduct a block of work as a complete project, or as a portion of a larger and more diverse project, with strict adherence to site-specific requirements as determined by work planning and control (WPC) protocols.
- Work across multiple disciplines on assignments of moderate to advanced complexity involving complete systems as well as components, modules, or subsystems.
- Use expanded list of tools and equipment with greater precision and independence in more complex applications.
- Assignments may be of a scheduling and planning nature, reviewing and integrating work performed by other individuals or departments ensuring efficient use of resources, monitoring target dates, coordinating, contributing to work planning and control (WPC) protocols and/or overseeing the work of other technicians, and evaluating possible effects on the end use application of an item, system or process.
- Follow outlined system requirements and information on any related work being performed. General instructions will be furnished by supervisor as to scope, objectives, time limitations, priorities, and similar aspects.
- Consult with supervisor where significant deviations from standard principles and practices. The supervisor will provides more detailed instructions when new criteria or techniques are involved.
- Review of work is made for adequacy of results, conformance with scientific and engineering concepts and usage as well as efficient use of resources.
- Perform assigned duties in compliance with site-specific requirements as determined by work planning and control (WPC) protocols.
- May perform any of the duties described in the Accelerator Technologist II specification or other duties as assigned.
- Adhere to safety rules.
Minimum Education and Experience
Demonstrated proficiency across multiple disciplines and skills and a working knowledge of an expanded list of tools and test equipment in more complex applications, with greater precision and independence than that required for the Accelerator Technologist II.
Additional three years of applicable journey level experience may substitute for formal education a combination of education and relevant work experience.
Knowledge, Skills and Abilities:
Accelerator Technologist III has all the qualifications described in the Accelerator Technologist II specification plus the following qualifications:
- Demonstrated ability to perform study and analysis of several possible courses of action, procedures, general layouts, designs, various precedents, and the adaptation of previous plans or methods.
- Demonstrated ability to apply originality and practical judgment and use scientific and engineering principles and practices.
- Must have extensive experience with the applicable test, assembly and fabrication tools.
- Must have design capabilities and be able to recommend or make improvements in techniques, operations, and procedures.
- Must be able to stay abreast of state-of-the-art developments in their area(s) of specialty.
- Must be able to perform all work in accordance with established safety and work planning and control procedures.
Certificates and Licenses Required
Valid California Non-commercial Class C Driver's license.
Skills
Sign in to read and join the discussion.