Embedded system Test Engineer
Description
Your Impact
As an Embedded Systems Test Engineer, you will play a key role in verifying and validating embedded monitoring products used in electrical substations, power generation and industrial environments.
You will work hands-on with products combining electronic hardware, embedded firmware, Linux-based platforms, analogue and digital I/O, networking and industrial communication protocols.
Working within our engineering laboratory, you will develop test methods, automate testing, simulate real-world operating conditions and investigate product and system failures. You will work closely with Hardware, Firmware, Software, Systems and Compliance teams to ensure our products are robust, reliable and compliant.
Our products support Grid Monitoring, Gas Insulated Switchgear (GIS) and Generation applications.
What You'll Do
- Perform hands-on verification and validation of embedded electronic products.
- Develop and execute product verification plans, test procedures and regression tests covering functional performance, electrical interfaces, communications, integration and system behaviour.
- Test the integration of hardware, embedded firmware, Linux/software platforms, sensors, analogue and digital I/O and communications.
- Investigate issues that occur at the boundaries between hardware, firmware, software and complete system operation.
- Develop automated test tools and test systems using technologies such as Python, C#, LabVIEW or similar.
- Develop and use test fixtures, hardware-in-the-loop (HIL) systems, simulators and fault-injection tools to reproduce product and field conditions.
- Use engineering laboratory equipment including oscilloscopes, DMMs, programmable power supplies, signal generators, electronic loads, data-acquisition systems and protocol analysers.
- Test and troubleshoot Ethernet, serial and industrial communications, using tools such as Wireshark and appropriate protocol test tools.
- Support testing of industrial protocols and interfaces including IEC 61850, DNP3, Modbus, Ethernet and RS-485.
- Perform EMC pre-compliance testing and fault investigation, including emissions, immunity, ESD, EFT and surge testing where applicable.
- Support formal EMC, electrical safety, environmental and regulatory qualification of our products.
- Support the Compliance team through external product certification and qualification, including preparing products and test configurations, taking equipment to external certification laboratories, supporting testing on-site, troubleshooting technical issues during testing, and coordinating engineering changes or retesting required to achieve compliance.
- Carry out product robustness and environmental testing including temperature, humidity, thermal cycling, vibration, endurance and soak testing.
- Reproduce and investigate field and customer-reported failures, using instrumentation, system logging, simulation and structured root-cause analysis.
- Maintain clear requirements-to-test traceability, test procedures, test results, defect records and verification evidence.
- Develop and maintain laboratory test fixtures, interface boxes, cable assemblies, simulators and reusable test infrastructure.
- Support the maintenance, configuration and calibration status of laboratory test and measurement equipment.
Work with engineering teams to bring verification earlier into product development, helping ensure requirements are clear, measurable and testable.
What You'll Bring
- Bachelor's or Master's degree in Electrical Engineering, Electronic Engineering, Computer Engineering or a related technical discipline, or an equivalent level of relevant industry experience.
- Hands-on industry experience in embedded product testing, electronics verification, hardware/firmware integration, product validation or automated test development.
- Strong understanding of embedded systems, digital and analogue electronics and electrical engineering principles.
- Practical experience developing and executing product verification plans and test procedures against defined requirements.
- Hands-on experience using electrical and electronic laboratory instrumentation to diagnose and investigate product behaviour.
- Experience testing systems incorporating combinations of electronic hardware, embedded firmware and software.
- Experience developing automated test solutions using Python, C#, LabVIEW or similar technologies.
- Ability to systematically investigate and isolate failures across hardware, firmware, software, communications and system-level interfaces.
- Experience capturing, analysing and communicating test results, defects and technical evidence.
- Understanding of requirements-based verification and requirements-to-test traceability.
- Ability to work independently, manage multiple technical priorities and drive verification activities through to completion.
- Strong analytical, troubleshooting and technical communication skills.
Ability to work collaboratively across Hardware, Firmware, Software, Systems, Compliance and other engineering disciplines.
Desirable Experience
Experience in some of the following areas would be advantageous:
- EMC pre-compliance, qualification and troubleshooting
- Product compliance and certification activities
- CE, UL, IEC or IEEE requirements
- Working with external certification and test laboratories
- Environmental and reliability testing
- HIL, simulation and fault injection
- Linux-based embedded platforms
- Ethernet and industrial networking
- IEC 61850, DNP3 and Modbus
- Wireshark and other protocol-analysis tools
- GPS, PTP, NTP or other precision timing technologies
- UART, SPI, I²C, CAN and RS-485
- Grid monitoring, Digital Fault Recording (DFR), Power Quality (PQ), PMU or condition monitoring
- Industrial electrical systems, cabinet wiring and DC power distribution
- Embedded cybersecurity testing
- Git and version control for test software, scripts and configurations
Maintenance of laboratory instrumentation, fixtures and calibration/configuration records
The Role in One Line
Hands-on embedded product verification combining electronics, firmware/software integration, laboratory testing, automation and HIL, EMC and external certification support, through to field-failure investigation.
- Bachelor’s or Master’s degree in Electrical Engineering, Electronic Engineering, Computer Engineering, or equivalent.
- Industry experience, including experience in embedded systems validation, hardware verification, or test automation within a laboratory or production environment.
- Strong understanding of embedded systems, digital and analogue electronics, and electrical engineering principles.
- Experience developing automated test solutions using scripting or programming languages such as Python, C#, LabVIEW, or similar.
- Ability to work independently, manage multiple priorities, and drive high-performance validation strategies.
Strong analytical, troubleshooting, interpersonal, and technical communication skills.
Preferred Skills
- Experience with cabinet wiring, electrical safety, circuit protection, and industrial control systems.
- Hands-on experience using oscilloscopes, digital multimeters (DMMs), signal generators, and other laboratory instrumentation for verification and validation activities.
- Experience with networking equipment, managed Ethernet switches, GPS, PTP, NTP, or other precision timing technologies.
- Experience troubleshooting network communications using packet capture and analysis tools such as Wireshark.
- Experience with industrial communication protocols including IEC 61850, DNP3, Modbus, and related testing methodologies.
- Experience developing automated test harnesses, regression test systems, and hardware-in-the-loop (HIL) test environments.
- Familiarity with protocol testing tools such as IEC Browser, IED Scout, Modbus Poll, and Modbus Slave.
- Exposure to fault location, digital fault recording (DFR), power quality (PQ), synchrophasor (PMU), condition monitoring, or other grid power system applications.
- Experience with Linux-based embedded platforms and use of version control tools such as Git.
- Knowledge of serial communication interfaces including UART, SPI, I²C, CAN, or RS-485.
- Exposure to cybersecurity testing, vulnerability assessment, secure communications protocols, or IEC 62443 requirements would be advantageous.
About Ralliant
Ralliant stands as a bold, independent public company driving innovation at the forefront of precision technology. With a global footprint and a legacy of excellence, we empower engineers to bring next-generation breakthroughs to life—faster, smarter, and more reliably.
Our high-performance instruments, sensors, and subsystems fuel mission-critical advancements across industries, enabling real-world impact where it matters most. From power generation and transmission to industrial automation and critical infrastructure, our technologies help customers monitor, protect, and optimize their most valuable assets.
At Ralliant, we’re building the future together with those driven to push boundaries, solve complex problems, and leave a lasting mark on the world.
#LI-SM1
Ralliant Corporation Overview
Ralliant, originally part of Fortive, now stands as a bold, independent public company driving innovation at the forefront of precision technology. With a global footprint and a legacy of excellence, we empower engineers to bring next-generation breakthroughs to life — faster, smarter, and more reliably. Our high-performance instruments, sensors, and subsystems fuel mission-critical advancements across industries, enabling real-world impact where it matters most. At Ralliant we're building the future, together with those driven to push boundaries, solve complex problems, and leave a lasting mark on the world.
About Qualitrol
QUALITROL manufactures monitoring and protection devices for high value electrical assets and OEM manufacturing companies. Established in 1945, QUALITROL produces thousands of different types of products on demand and customized to meet our individual customers’ needs. We are the largest and most trusted global leader for partial discharge monitoring, asset protection equipment and information products across power generation, transmission, and distribution. At Qualitrol, we are redefining condition-based monitoring.
We Are an Equal Opportunity Employer. Ralliant Corporation and all Ralliant Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Ralliant and all Ralliant Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at applyassistance@Ralliant.com.
Skills
Sign in to read and join the discussion.