Machine Operator - CTRW
POSITION SUMMARY
The Machine Operator safely operates specialized machinery for railroad track construction or repair. Drives company vehicles and operates any heavy equipment needed for specified tasks designated by the Roadmaster. Performs other track maintenance related tasks as needed.
The Machine Operator demonstrates and adheres to the company values of: safety, honesty, ownership, respect and teamwork to ensure successful partnership with customers and employees that result in OmniTRAX’s continued success.
ESSENTIAL RESPONSIBILITIES
Ensure compliance with all railroad rules and regulations for safety, operation and Transport Canada (TC)
Work safely in a construction field environment following safety rules; carry out work in manner that promotes safe work environment
Drive company vehicles including, but not limited to: Backhoe, Grapple Truck, Boom Truck and Tamper
Considered an expert in operating all CDL equipment, and handles all advanced operating duties
Raise rail: use track jack to facilitate removal and installation of railroad ties
Drill holes through rails for insertion of bolts: operate power drill
Operate track-wrench machine to tighten or loosen bolts at rail joints
Operate rail saw to cut rails to specified length
Operate spike pullers, spike drivers to perform construction and maintenance tasks associated with railroad tracks
OTHER DUTIES
Work safely to prevent on the job accidents and injuries
Wear required protective equipment (PPE) such as: hard hats, hearing protection, safety-toe boots, safety glasses etc.
Work hours may include a nonstandard workweek, overtime and various shift work
Perform other duties and projects as assigned
SUPERVISORY RESPONSIBILITIES
None
REQUIRED QUALIFICATIONS, KNOWLEDGE, SKILLS, AND ABILITIES
High School Diploma/GED
1 year of track maintenance experience
1 year of heavy equipment operation to include: Backhoe, Grapple Truck, Boom Truck and Tamper
Operate hand tools, including: wrenches, sockets, screwdrivers, measuring tapes, etc.
Operate power tools and hydraulic equipment, including: portable grinders, rail saws, spike pullers, track wrench machines, power drills
Apply commonsense understanding to carry out detailed, but uninvolved written or oral instructions
Perform concepts of basic shop math, calculate figures and amounts such as: area, circumference, length, distance, and volume
Write legible to complete routine reports, and complete required testing
Effectively communicate with all level of employees and business associates in a clear, concise and professional manner
Read, comprehend and comply with published rules, procedures and manuals, inspection checklists, government regulations, operating and maintenance instructions, memos and other work-related information
Familiar with Roadway Worker’s Protection (RWP)
Demonstrate problem solving and troubleshooting skills resulting in effective resolution
Basic computer skills
Professional integrity and accountability
Work in fast-paced collaborative environment
REQUIRED CERTIFICATIONS AND LICENSES
Valid Driver’s License - CDL (or attain one within 90 days); pass medical certification and Drivers Qualification File, pass Drug & Alcohol testing
Roadway Worker Protection Qualified
PREFERRED QUALIFICATIONS, KNOWLEDGE, SKILLS, AND ABILITIES
Previous experience in Rail Transportation, Supply Chain Logistics, Manufacturing and/or Oil & Gas industries
PREFERRED CERTIFICATIONS AND LICENSES
- Qualify in Track Inspection as required by Transport Canada
WORK ENVIRONMENT
Exposure to hot, cold, wet, humid or windy conditions caused by the weather including: snow, rain, heat and sub-freezing temps
TRAVEL
Daily travel as business requires during scheduled work hours
PHYSICAL REQUIREMENTS
Strength
Occ
Freq
Cons
Weight/ Force
Side
Height From
Height To
Lifting - "136-pound Plate"
X
18.9 lb
Two Hands
0 in
40 in
Lifting - Lining Bar
X
26 lb
Two Hands
0 in
40 in
Lifting - Claw Bar
X
30.7 lb
Two Hands
0 in
60 in
Lifting - Impact Wrench
X
31 lb
Two Hands
0 in
40 in
Lifting - Portable Derail
X
44.3 lb
Two Hands
0 in
40 in
Lifting - Track Jack
X
48.5 lb
Two Hands
0 in
40 in
Lifting - Compromise Bar (136/115)
X
53.8 lb
Two Hands
0 in
40 in
Lifting - 136-pound Angle Bar
X
56.1 lb
Two Hands
0 in
40 in
Lifting - 136-pound Angle Bar
X
58.8 lb
Two Hands
0 in
40 in
Lifting - Tools, Parts and Equipment
X
65 lb
Two Hands
0 in
60 in
Strength
Occ
Freq
Cons
Weight/ Force
Side
Height
Rotation
Grip
Pattern
Hand
Spread
Pushing - Manual Track Wrench
X
106 lb
Two Hands
35 in
Neutral
Cylinder
Pushing - Spike Puller/Claw Bar
X
118.8 lb
Two Hands
Waist
Pronated
Hook
Pushing - Ergo Bow Switch
X
133.7 lb
Two Hands
35 in
Neutral
Cylinder
Pulling - Hydraulic Spike Driver
X
60.5 lb
Two Hands
26 in
Pronated
Cylinder
13 in
Pulling - Hydraulic Spike Puller
X
63.9 lb
Two Hands
34 in
Pronated
Cylinder
10 in
Pulling - Ergo Bow Switch
X
75.1 lb
Two Hands
35 in
Neutral
Cylinder
Pulling - High Stand Switch
X
87 lb
Two Hands
36 in
Pronated
Cylinder
Pulling - Rail Turner 39-foot Rail (90 lb)
X
88.3 lb
Two Hands
Waist
Neutral
Cylinder
Pulling - 10-Foot Tie with Tie Tongs
X
119.1 lb
Two Hands
30 in
Neutral
Hook
Pulling - Drag 10-Foot Tie with Tie Tongs
X
174.7 lb
Two Hands
25 in
Neutral
Hook
Upper Body
Occ
Freq
Cons
Description
Reaching - Below Knee
X
Extending hand(s) and arm(s) below the level of the knee.
Reaching - Over Shoulder
X
Extending hand(s) and arm(s) above shoulder level.
Reaching - Knee to Shoulder
X
Extending hand(s) and arm(s) between knee and shoulder level.
Handling - Both
X
Seizing, holding, grasping, turning, or otherwise working with hands.
Fingering - Fine Motor Manipulation
X
Picking, pinching, or otherwise working primarily with fingers.
Cervical Flexion/Extension
X
Flexing and/or extending at the cervical spine.
Rotation - Cervical
X
Rotating at the cervical spine.
Rotation - Thoracic & Lumbar
X
Rotating at the thoracic and lumbar spine.
Lower Body
Occ
Freq
Cons
Description
Sitting
X
Remaining in a seated position.
Standing
X
Remaining on one’s feet in an upright position without moving about.
Walking
X
Moving about on foot. Walk on uneven surfaces.
Climbing
X
Ascending or descending between two points.
Balancing
X
Maintaining body equilibrium to prevent falling.
Stooping
X
Bending body forward by bending spine at the waist.
Kneeling - Two Knees
X
Bending legs at knees to come to rest on one or both knees.
Crouching/Squatting
X
Bending body downward and forward by bending legs and spine.
*Occ = Occasional; defined as 1-33% of a usual and customary workday.
*Freq = Frequent; defined as 34-66% of a usual and customary workday.
*Cons = Constant; defined as 67-100% of a usual and customary workday.
** Not all tasks required at each location. Position and physical demand is representative, but individualized assessment may be necessary.