Material Handler

Overview of Responsibilities:

Material Staging and Inventory Control Responsibilities:

• Create primary operations work orders, labels and assign lot numbers for each production run per Leads request.
• Pull material from correct rack location based on item and lot numbers in IQ
• Scan all material with Niton analyzer prior to staging bar stock to work center
• Conduct transactions by Donatelle Shop Floor or Production Reporting Assistant to advance inventory in system at end of run
• Rescan all material that is to be returned for quality assurance, returning bar stock to proper location
• Monitor and maintain inventory and location of each raw bar stock material in the stock room and on the production floor
• Perform secondary operations duties including Manufacturing Associate III duties when primary material handling duties are satisfied.
• Cycle count material and machine tooling in DPC and in Stockroom area.
• Color code new stock that will have to be filed

Machine Monitoring and Operation Responsibilities:

• Verify bar stock ends are colored coded per Standard Work Instruction.
• Change oil and clean machines as scheduled or as needed.
• Monitor and maintain fluids used in the DPC machining department.
• Collect chips from machine chip totes and return any oil in tote back into the machine.
• Maintain, spin, and clean the chip spinning material.
• Verify material using material analyzer gun.
• Organize or store palletized material using a forklift.

When primary functions such as Machine & Stock Room support are not required, this role automatically transitions to support for Secondary Operations.

Assembly and Secondary Operations Responsibilities:

• General setup/monitoring of auxiliary equipment such as but not limited to Hone Fixtures, Deburring/Washing Machines
• Operate one or more auxiliary equipment such as but not limited to Hone Fixtures, Deburring/Washing Machines, and Spring Welder

• Weigh, sort, and package parts per work instructions
• Perform part assembly as required per work instructions including proper handling of parts possibly smaller than 1/8” by 1/8”

Inspection and Measurement Responsibilities:

• Visual inspection and gauging of parts for foreign material and defects per work instructions
• Advanced use of microscope and other measurement tools to determine part quality
• Verify that parts being produced and used by production meet print specifications dimensionally and visually
• Assist machining and second operations in deburring, inspect and document measurements using a variety of precision measuring instruments; Includes checking for visual and dimensional defects
• Refer all deficiencies to production support personnel and generate material review request for suspect product as necessary

General Responsibilities:

• Responsibility to protect Donatelle confidential information and Intellectual Property
• Follow safety requirements as outlined in the safety manual
• Perform other projects and duties as assigned