PTW Coordinator/Permit Receive/Hole Watcher/Tank Fabricator/Pipe Fabricator/Tank Fitter/Pipe Fitter/Mechanical Fitter/Mechanical technician/Arc Welder 3G & 4G
Description
7. PTW Coordinator – 01 No
Work Experience- Minimum 05 Years
Educational Qualification – Bachelor’s Degree in Mechanical Engineering or Diploma in
Mechanical or its related fields.
Communication Skills - Excellent written and verbal communication skills to effectively
interact with team members, contractors, and other stakeholders.
Technical Knowledge- Strong understanding of tanks rehabilitation, materials and
relevant industry standards. Having strong knowledge in E PTW Permit System and having
valid e-PTW card.
Salary Range – QAR 1500 to 1800 Basic + OT
Duty Timing– 12 Hours (6 AM to 6 PM) / Night Shift as Required
Work Location – Onshore / Offshore – Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Description: -
Minimum five (05) years of experience in Oil & Gas maintenance and shutdown projects
involving static equipment such as heat exchangers, fin fan coolers, heaters, furnaces,
boilers, pressure vessels, separators, filters, knock-out drums, and similar equipment, with
sound knowledge of equipment cleaning, inspection readiness, hydrotesting, and
reinstatement activities.
Coordinate, obtain, monitor, and close all Permit to Work (PTW) activities, ensuring that no
work commences without valid approvals and compliance with client and company
procedures.
Possess strong working knowledge of IntelliPermit (Electronic Permit to Work System) and
be capable of creating, tracking, updating, and managing permits throughout the work
execution cycle.
Coordinate with Operations, Maintenance, Construction, HSE, QA/QC, and Client
Representatives to obtain necessary work permits, isolations, gas test approvals, SIMOPS
clearances, and work authorizations.
Review work scopes, method statements, risk assessments (JSA/JHA), and permit
requirements to ensure all safety controls and supporting documents are in place before
work starts.
Monitor permit status throughout the shift, ensure permits remain valid, coordinate
extensions or suspensions when required, and maintain accurate permit registers and
documentation.
Ensure full compliance with PTW procedures, HSE regulations, company standards, and
statutory requirements while supporting safe execution of maintenance and shutdown
activities.
Prepare daily permit reports, permit status logs, work progress updates, and maintain
effective communication between site execution teams, operations, and project
management.
Be capable of working independently under pressure during shutdowns and turnaround
projects, ensuring timely permit coordination while maintaining the highest standards of
safety, quality, and operational efficiency.
8. Permit Receiver/Hole Watch – 19 Nos
Work Experience- Minimum 2 years experience
Educational Qualification – Bachelor’s Degree in Mechanical Engineering or Diploma in
Mechanical or its related fields.
Communication Skills - Excellent written and verbal communication skills to effectively
interact with team members, contractors, and other stakeholders.
Technical Knowledge- Understanding of Tanks rehabilitation, materials and relevant
industry standards. Having knowledge in E PTW Permit System and Able to Pass E PTW.
Salary Range – QAR 1000 Basic + OT (QAR 200 will increase, if PTW exam passed)
Duty Timing– 12 Hours (6 AM to 6 PM) / Night Shift as Required
Work Location – Onshore / Offshore – Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Description: -
Minimum 02 years of experience in Oil & Gas, industrial construction, maintenance, or
shutdown projects with basic knowledge of the Permit to Work E (PTW) system and
confined space entry procedures.
Receive and understand approved Permit to Work E(PTW) requirements and ensure all
assigned activities are carried out in accordance with permit conditions, safety procedures,
and supervisor instructions.
Perform Hole Watch duties during confined space entry activities by maintaining continuous
communication with personnel inside the confined space and ensuring compliance with
confined space entry requirements.
Verify that all required safety precautions, including gas testing, ventilation, barricading,
rescue equipment, and emergency arrangements, are in place before and during confined
space work.
Maintain entry and exit records of personnel, monitor confined space activities
continuously, and immediately report any unsafe conditions or emergencies to the
Supervisor or HSE personnel.
Coordinate with Permit Coordinators, Supervisors, Area Authorities, and HSE personnel to
ensure safe execution of work and compliance with PTW procedures.
Ensure compliance with Client HSE regulations, PTW requirements, and confined space
safety procedures at all times.
Be willing to learn, work independently under supervision, and perform multitask site duties
while maintaining a high level of safety awareness and discipline.
9. Tank Fabricator – 08 Nos
Educational Qualification- SSC/HSC/ITI
Experience – Minimum of 10 years’ experience
Age – Minimum 25- 40 Years
Language Knowledge- Hindi / English
Salary - QAR 1400 to 1600 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility:
Perform fabrication and fitting works for tank rehabilitation, including piping and structural
steel components, ensuring all activities are carried out in accordance with approved
drawings, specifications, and project requirements.
Execute the installation of tank components, including shell plates, bottom plates, roof
plates, nozzles, and structural members.
Read, interpret, and work from engineering drawings, including piping isometrics, General
Arrangement (GA) drawings, and structural assembly drawings, to ensure accurate
fabrication and installation with minimum supervision.
Carry out gas cutting, plasma cutting, grinding, and other fabrication activities using tools
and machines such as pug cutting machines, band saws, and related equipment.
Carry out tack welding and, under minimal supervision, perform patch welding, nozzle
repair welding, barrel welding, and related repair works as required for fit-up and
maintenance activities.
Assist in installation activities including manual material handling, alignment, fitting, and
positioning of structural and piping components.
Perform hydrotesting activities as required, including operation and monitoring of chart
recorders and ensuring test procedures are followed correctly.
Work independently and multitask as per site requirements, ensuring productivity, quality,
and safety standards are maintained at all times.
Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.
10. Pipe fabricator – 04 Nos
Educational Qualification- SSC/HSC/ITI
Experience – Minimum of 10 years’ experience
Age – Minimum 25- 40 Years
Language Knowledge- Hindi / English
Salary - QAR 1400 to 1600 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility:
Perform fabrication and assembly of piping systems for Piping projects, ensuring all works
are carried out in accordance with approved isometric drawings, specifications, and quality
standards.
Read, interpret, and execute piping isometric drawings, GA drawings, spool drawings, and
fabrication sketches with minimum supervision.
Carry out Gas cutting,pipe cutting, beveling, grinding, fit-up, and alignment activities using
hand tools and mechanical equipment such as beveling machines, grinders, and cutting
machines.
Perform tack welding and support welding activities including fit-up welding, pipeline
welding, and repair welding as required under minimal supervision.
Carry out installation and assembly of piping systems including spools, supports, flanges,
valves, and related components as per site requirements.
Support hydrotesting activities including line preparation, test arrangement, and monitoring
of pressure testing using approved procedures and instruments.
Ensure all fabrication activities are performed in compliance with safety procedures, QA/QC
requirements, and project specifications, maintaining high standards of workmanship.
Work independently and multitask at site as required, ensuring timely completion of
fabrication activities while maintaining productivity, quality, and safety standards.
Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.
11. Tank Fitter – 26 Nos
Experience – Minimum of 5 years’ experience
Age – Minimum 25- 40 Years
Language Knowledge- Hindi / English
Salary - QAR 1200 to 1400 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility:
Perform fitting, alignment, and installation of tank components including shell plates, bottom
plates, roof plates, nozzles, and structural steel sections as per drawings and project
specifications.
Read and interpret engineering drawings, isometric sketches, blueprints, and tank repair
plans to ensure accurate positioning and assembly of components with minimum
supervision.
Use gas cutting (oxy-acetylene and plasma cutting) to cut steel plates, pipes, and structural
materials as required for fabrication, repair, and installation works.
Carry out repair, removal, and reinstallation of tank structures including shell, bottom, roof,
and supports, ensuring proper alignment and fit-up for welding or bolting.
Perform tack welding for fit-up support and assist in welding preparation activities while
ensuring accurate measurement, cutting, and material handling.
Support hydrotesting activities using chart recorders, perform manual material handling,
and work independently while handling multitask site requirements in compliance with
safety and quality standards.
Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.
12. Pipe fitter – 08 Nos
Experience – Minimum of 5 years’ experience
Age – Minimum 25- 40 Years
Language Knowledge- Hindi / English
Salary - QAR 1200 to 1400 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility:
Install, repair, and maintain piping systems (carbon steel, stainless steel, and other
materials) in industrial Oil & Gas, refinery, and petrochemical environments as per project
requirements.
Read and interpret piping drawings, isometric diagrams, blueprints, and P&IDs to
determine layout, material requirements, and installation methodology.
Perform pipe preparation activities including cutting, threading, bending, beveling, grinding,
and cleaning to ensure proper fit-up for welding works.
Assist welding activities by ensuring correct alignment, joint preparation, tack welding, and
coordination with welders for proper fabrication and installation.
Carry out pressure testing and hydrotesting support activities, including inspection of joints,
valves, and connections to ensure system integrity and leak-free performance.
Work independently and handle multitask site requirements, including manual material
handling and working in confined spaces or at heights, while maintaining safety, quality,
and productivity standards.
Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.
13. Mechanical fitter – 18 Nos
Experience – Minimum of 5 years’ experience
Age – Minimum 25- 40 Years
Language Knowledge- Hindi / English
Salary - QAR 1200 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility:
Must have maintenance and shutdown experience in static equipment such as heat
exchangers, Tanks, fin fan coolers, heaters, furnaces, boilers, pressure vessels,
separators, filters, knock-out drums, and similar equipment, with knowledge in tightening,
torqueing, installation, hydrotesting, and mechanical integrity checks.
Carry out dismantling, inspection, cleaning, repair, reassembly, and installation of static
equipment, ensuring compliance with OEM procedures, project specifications, and industry
standards.
Perform flange management activities including bolt tightening, torqueing, bolt tensioning,
gasket replacement, leak prevention, and proper joint integrity assurance.
Execute equipment preparation activities such as blinding/de-blinding, box-up/box-in,
isolation checks, internal cleaning, and readiness for inspection or hydrotesting.
Perform alignment, leveling, fit-up, and reinstatement of static equipment to ensure
mechanical stability, efficiency, and safe operation after maintenance.
Use mechanical tools, torque wrenches, hydraulic tools, lifting equipment, and measuring
instruments safely and effectively during shutdown and maintenance activities.
Work efficiently in shutdown and turnaround environments, ensuring equipment reliability,
integrity, and timely completion of maintenance activities under strict safety standards.
14. Mechanical Technician – 14 Nos
Experience – Minimum of 5 years’ experience
Age – Minimum 25- 40 Years
Language Knowledge- Hindi / English
Salary - QAR 1400 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility:
Perform preventive, corrective, and shutdown maintenance of static equipment such as
heat exchangers, fin fan coolers, heaters, furnaces, boilers, pressure vessels, separators,
filters, and knock-out drums, ensuring equipment reliability and mechanical integrity.
Carry out inspection, troubleshooting, and fault diagnosis of static equipment to identify
defects such as leakage, corrosion, wear, misalignment, and performance issues.
Execute dismantling, internal inspection support, cleaning, repair coordination, reassembly,
and reinstatement of equipment as per OEM procedures, inspection findings, and approved
work methods.
Perform flange management activities including bolt tightening, torqueing, tensioning,
gasket replacement, sealing integrity checks, and leak rectification.
Carry out equipment preparation activities including isolation verification, blinding/de-
blinding, box-up/box-in, internal cleaning checks, and readiness for inspection and
hydrotesting.
Work efficiently in shutdown and turnaround environments, ensuring equipment reliability,
integrity, and timely completion of maintenance activities under strict safety standards while
complying with HSE procedures, and QA/QC requirements.
Execute equipment preparation activities such as blinding/de-blinding, box-up/box-in,
isolation checks, internal cleaning, and readiness for inspection or hydrotesting.
15. Arc Welder 3G & 4G – 35 Nos
Experience – Minimum of 5 years’ experience
Language Knowledge- Hindi / English
Salary-QAR 1200 to 1500 + OT / Month for 8 Hrs Working / Night Shift Work As required .
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility:
Perform welding operations in 3G (vertical) and 4G (overhead) positions for structural steel,
piping, and tank rehabilitation works as per approved drawings and WPS.
Tank Experience is mandatory and having valid running welder card.
Carry out welding using SMAW (Shielded Metal Arc Welding / Arc Welding) process on
carbon steel and structural steel materials.
Execute welding of tank components including shell plates, bottom plates, roof structures,
stiffeners, and structural supports in compliance with project requirements.
Prepare joints by ensuring proper fit-up, alignment, cleaning, and tack welding support
before final welding execution.
Follow applicable welding standards such as ASME Section IX, AWS D1.1, and project-
specific specifications.
Work independently and handle multitask site requirements while maintaining high-quality
welds and strict safety compliance.
Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.