Skip to content
Search jobs inside your AI agent. Claude, ChatGPT, Claude Code, Codex, Gemini, Cursor and Grok
Connect

Geometrics Engineering

NewBe an early applicant

Senior Seismic / Geotechnical Engineer

Posted Updated

Description

Geometrics is hiring a licensed geotechnical or seismic engineer to lead site-specific seismic hazard and ground motion work for essential-facility buildings and infrastructure. The role is open to full-time, part-time or remote candidates.

Schedule: Full-time or part-time (minimum hours to be agreed)

Location: Redmond, WA office, hybrid, or remote

Travel: Occasional Puget Sound site visits and meetings; more if local

About Geometrics. Geometrics Engineering, Inc. is a geotechnical and civil engineering firm based in Redmond, Washington. We deliver geotechnical design, pavement engineering and construction services for airports and infrastructure across the Pacific Northwest and nationally, with a team of about 45 people in the U.S. and an affiliate office in Pune, India.


Key responsibilities

You will own the seismic ground motion work on Geometrics projects, from the field program through a stamped report and peer review. Typical projects are Risk Category III and IV buildings, such as air traffic control towers and fire stations, on soft, liquefiable alluvium near active faults.

Field program and site characterization

  • Review exploration, geophysics and lab programs before drilling. Set the reference (input) layer for site response and the Vs depth needed to reach it.
  • Specify and verify P-S suspension logging, seismic CPT (SCPTu), downhole, and MASW/ReMi surveys.
  • Develop best-estimate, lower-bound and upper-bound Vs profiles. Extend them below exploration depth using regional basin velocity models.
  • Assign modulus reduction and damping curves from lab data or published models, with large-strain strength corrections. Specify cyclic DSS and other dynamic lab tests.

Hazard analysis

  • Run PSHA using the USGS NSHM version that matches the governing code, with deaggregation by source type, magnitude and distance.
  • Model shallow crustal faults (including the Seattle Fault Zone), deep intraslab, and Cascadia interface sources.
  • Develop risk-targeted MCER spectra with maximum-direction conversion. Perform deterministic checks per ASCE 7 Chapter 21.
  • Evaluate basin amplification (Z1.0/Z2.5 terms and published basin factors) without double-counting it in 1D site response.
  • Evaluate near-fault directivity and velocity-pulse effects, and decide whether pulse-like records are needed.

Ground motions and site response

  • Develop conditional mean or scenario target spectra for each controlling source type.
  • Select and scale, or spectrally match, suites of 7 to 11 records per source type. Interface suites must reflect long Cascadia durations.
  • Prepare ground motion suites for nonlinear response history analysis per ASCE 7 Chapter 16, including pulse and no-pulse records for near-fault sites.
  • Run 1D equivalent-linear and nonlinear total-stress analyses.
  • Run nonlinear effective-stress analyses with calibrated constitutive models (such as PM4Sand and PM4Silt) to capture pore pressure generation and liquefaction.
  • Bracket liquefied and non-liquefied response, and recommend how it is enveloped in design spectra.
  • Apply kinematic soil-structure interaction (base-slab averaging and embedment) per ASCE 7 Chapter 19 where requested.

Design parameters and geotechnical inputs

  • Recommend surface MCER and design spectra, with the 80% lower limit, and SMS, SM1, SDS, SD1 and PGAM.
  • Provide multi-period spectra and the new site classes under ASCE 7-22. Provide parameters for both editions while code adoption is pending.
  • Document whether ASCE 7 Section 11.4.8 exceptions apply for short-period structures.
  • Develop ASCE 41 BSE-1E and BSE-2E spectra when existing buildings are evaluated.
  • Provide PGAM, magnitude, CSR and shear strain profiles for liquefaction triggering and settlement analyses.
  • Provide free-field displacement profiles for pile kinematic and lateral spreading analyses.

Reporting and coordination

  • Prepare and stamp design ground motion reports, with spectra tables, time histories and site response files for the structural engineer.
  • Respond to independent peer review and building department comments.
  • Coordinate with Geometrics geotechnical staff, structural engineers of record, and owners.
    • Mentor Geometrics engineers and help build the firm's in-house earthquake engineering capability.

Required qualifications

A current Professional Engineer license in any U.S. state is required. Washington or California licensure is preferred.

  • Professional Engineer (PE) license in good standing in any U.S. state.
  • B.S. in civil engineering or a related field.
  • At least 10 years of experience in seismic hazard analysis and site response for buildings or infrastructure.
  • Site-specific ground motion studies completed under ASCE 7 Chapter 21 for Risk Category III or IV structures.
  • PSHA using USGS NSHM models, with ground motion selection for both subduction and crustal sources.
  • Nonlinear effective-stress site response at liquefiable sites, such as PM4Sand/PM4Silt in FLAC, OpenSees or DEEPSOIL.
  • Working knowledge of NGA-West2 and NGA-Sub ground motion models.
  • Clear technical writing, with reports that pass peer review and building department review.
  • Valid U.S. driver's license, and ability to obtain airport security badging for site work.
  • Authorization to work in the U.S. Offers are contingent on a background check and drug screening.

Preferred qualifications

Puget Sound and California seismic experience are the strongest differentiators.

  • PE licensed in Washington, or eligible for Washington licensure by comity. A California PE or GE is a strong plus.
  • Puget Sound project experience, including Seattle Fault Zone and Seattle basin effects.
  • Experience at airports and other essential facilities, such as control towers, fire stations and hospitals.
  • Experience with independent peer review and building department review of site-specific studies.
  • Familiarity with both ASCE 7-16 and ASCE 7-22, including multi-period spectra and the new site classes.
  • Experience with ASCE 41 seismic hazard levels for existing buildings, and with kinematic soil-structure interaction.
  • Experience developing ground motions for nonlinear response history analysis, including near-fault pulse records.
  • M.S. or Ph.D. in geotechnical earthquake engineering.

Compensation and benefits

Pay is TBD and can be negotiable depending on the job position preference. Pay range is $150,000 – $180,000 per year for full-time, or $72 – $86 per hour for part-time, based on experience and licensure.

Geometrics provides:

  • Company-paid medical, dental and vision insurance.
  • Company-paid short-term disability, long-term disability and life insurance. Life insurance coverage is three times salary, up to $500,000.
  • 401(k) contribution of 3% of annual salary, subject to minimum hours and service requirements.
  • Three weeks of vacation and one week of medical leave.
  • Ten national holidays plus two floating holidays.
  • Professional memberships, registrations and license renewals paid by the company.
  • $52 per month mobile phone stipend.
  • Flexible arrangements: remote, hybrid or part-time schedules considered.

Benefit eligibility and paid leave for part-time schedules will be confirmed at offer.

Pay Range
$150,000—$180,000 USD

Skills

What Senior Industrial Engineering jobs ask for — and how much of it you have →
Apply

See also

Industrial Engineering jobs by country — openings, pay and top skills →