慧榮科技股份有限公司_SMI
Open positions
【116年研發替代役】Digital CAD工程師-新店
1. Front-End & Back-End design flow development, including implementation, optimization, and methodology enhancement. 2. Foundry PDK, IP, and library technical support & maintenance 3. Automated design platform…
類比IC設計工程師(DRAM IO)-竹北
1.IO Design. 2.DDR Analog. 3.DDR RX/TX design. 4.擁有DRAM IO設計經驗，有DDR5以上經驗者尤佳。
軟韌體驗證開發工程師-澳門
1. Develop the SSD/eMMC/UFS verification environment and scripts/tools 2. Formal verification flow build-up and checking 3. FW debug tool development (Scripts or Software tools)
Legal Manager-Zhubei
1.Provide legal advice and support to business leaders and key stakeholders on business transactions, commercial matters, and corporate decision-making, with the ability to understand legal challenges and balance legal…
SSD韌體工程師-新店
SSD韌體開發
PCIe 6.0 DSP 演算法工程師-新店
1.負責 PCIe 6.0 PHY DSP 演算法之設計、建模、模擬與驗證。 2.開發高速 SerDes 相關演算法，包含 equalization、CDR、timing recovery、adaptation 與 calibration。 3.使用 MATLAB / Python / C/C++ 建立系統模型，分析 BER、jitter、ISI、channel loss 與 link margin。 4.與 Analog /…
【116年研發替代役】CAD工程師(Physical Design & Analog)-新店
1. Analog design automation flow development. 2. Physical verification flow and technical support. 3. Define PG network structure 4. IR/EM analysis and fixing . 5. Flipchip bump & RDL implementation.
CAD工程師(AI driven implementation)-新店
1. Good understanding of design flow automation, integration of Cerebrus with synthesis and APR flow 2. Ability to analyze and optimize the QoR by using machine learning exploration 3. Hands-on experience with Cadence…
【116年研發替代役】韌體設計工程師-竹北
1. SSD/eMMC/UFS controller firmware design, customization and customer support. 2. SATA/PCIe/NVMe/USB protocol firmware design.
SSD韌體設計工程師-竹北
1.SSD controller firmware design, FTL, customization and customer support. 2.SATA/PCIe/NVMe protocol firmware design.
【116年研發替代役】軟體研發工程師-竹北
1. 開發驗證/Debug FW演算法之Window/Linux工具(SATA/NVMe/USB) 2. 針對客戶需求客製化工具 3. 治具FW開發 4. 熟C/C++, GUI/IDE設計 5. 具Linux/Window driver開發經驗者佳 6. 具RSA/ECDSA/SM3/SHA..等Security演算法經驗者佳
eMMC/UFS NAND演算法工程師-竹北
1.Develop eMMC/UFS firmware. 2.Design eMMC/UFS FTL/CTL algorithm.
SSD軟體研發工程師-竹北
1.分析/量產工具開發 2.依據NVMe SPEC調整Library 3.治具韌體驗證與開發 4.客戶回報異常問題分析 5.開發驗證/Debug FW演算法之Window/Linux工具(SATA/NVMe/USB) 6.OPROM開發/Driver開發 7.規劃與實作 CI/CD 自動化流程，整合建置、測試與部署機制
eMMC/UFS韌體應用工程師(AE)-竹北
1. 客戶端問題收斂解決 2. 產品驗證與量測 SI / PI 3. 跨部門溝通與合作 4. 平台端應用軟體開發
數位IC設計工程師II-新店
1. Maintain USB3.2/SATA/PCIe MAC Mass Production ICs and issue tracking/debugging 2. Integrate USB3.2/USB4/SATA/PCIe related IPs 3. Analysis, design and verify USB3.2/USB4/SATA/PCIe clk_rst, DMA datapath and peripheral…
數位IC設計工程師I-新店
1. Digital IC design 2. Low power design 3. RTL coding/simulation 4. SoC integration 5. FPGA/IC verification
【116年研發替代役】類比IC設計工程師(SerDes)-新店
1. PCIe/MPHY high-speed PHY mixed signal design：TX(FFE, driver), RX(CTLE, DFE, CDR), PLL(LC-tank VCO), DAC/ADC, Bandgap, LDO, POR, IO/ESD, … etc. 2. Communicate with digital, layout and system engineer. 3. Design…
Analog Layout工程師-新店
Serdes/AIP/IO layout
類比IC設計工程師(SerDes)-新店
1. High-speed PHY TX(FFE, driver), RX(CTLE, DFE, CDR) and PLL design。 2. Communicate with digital, layout and system engineer。 3. Design verification/documentation/supporting。 4. PAM4 circuit design experience is a plus。
高速介面Serdes PHY數位IC設計工程師-新店
1. RTL/Digital circuit design, synthesis, and simulation/verification. 2. FPGA/IC verification 3. PCIe PHY digital design & verification.